Canon Pixma Tr4520 Fax Setup

Ultimate Guide to Canon Pixma Tr4520 Setup :

A printer will definitely make your life easier but it may take some time to fully understand it. If you have purchased the Canon Pixma Tr4520 setup, you will need to start with the printing process before starting it. We will cover the following points so that you do not have to browse through many links to find answers to your questions:

Canon  TR4520 Print Setup :-

  • Turn on your printer
  • Open the input tray and place the A4 sheet in the tray
  • Make sure the sheets align before you have them
  • Download and install drivers on the system
  • Choose Important Print Settings
  • Once you have checked the settings, click ‘Apply‘ to make the changes.
  • Select paper size and additional features according to prices
  • Choose print quality and allow printer to print
  • When you select the print operation with the current setting operation, the settings will be saved

Pixma TR4520 Copy Setup :

  • Turn on your printer and then follow the instructions to begin the primary setup process
  • Add the number of sheets you need in the input tray
  • Place the original document on the scanner bed
  • Click to copy and you can choose the color as per your choice
  • Select the number of copies as per your requirement and you can also select copy standards
  • Preview the docs and then click on ‘OK’
  • If you want to stop this process, you can do so by clicking on ‘Stop
  • Once the process is done, extract the original copy of the document

Canon Pixma TR4520 Scan Setup :-

  • Turn on your printer and system
  • Make all the necessary printer settings
  • Pull the scanner lid and clean the surface
  • Place the original doctor on the scanner bed so that the scanning process can begin
  • Once you put in the documents, you can close the scanner lid
  • Click ‘Scan’ and you can scan pages with the color of your choice
  • To save scanned docs choose a location on the system and you can access it from there

Canon Pixma TR4520 USB Connection Setup :

  • Download the appropriate drivers from the manufacturer’s website
  • Run the setup file to install it on the operating system
  • Follow the instructions shown on the screen to successfully install the drivers
  • When you are doing the installation process, you will be asked the method of connecting
  • Choose USB as the connection method and proceed with the configuration
  • Use your USB cable to connect the Canon PixmaTR4520 to the operating system
  • Wait for the connection to occur and you can make changes if necessary
  • Open the document that needs to be printed and check if the connection was successful

Canon Pixma TR4520 Wireless Connection Setup :-

  • You can also use the Canon Pixma TR4520 with a wireless connection
  • Make sure the printer is powered on before starting
  • Once it is powered on, an alignment process will be performed
  • Go to LAN Settings and click ‘LAN Wireless Direct‘ on the screen to turn it on
  • Complete the setup process on the system
  • Install the drivers by following the instructions that appear on the screen
  • During the process, select ‘Wireless‘ as the connection type and configure the setup

Troubleshooting – Canon Pixma TR4520 Printer Not Working :-

  • Ensure that the printer is connected to the power source and is switched on
  • Connect the Canon Pixma TR4520 printer to the system
  • If you are connecting it via wire then see if it is plugged in correctly
  • After the process is complete, restart the system and the printer
  • Try printing and see if the issue is resolved

Troubleshooting – Canon Pixma TR4520 Wireless Setup Problem:-

  • Make sure the printer is powered on
  • See if the driver is connected to the correct port
  • Go to LAN Settings and click on ‘Connection Wireless Connection’.
  • Make sure the wifi button on the panel is on
  • Assign the print job to the Canon Pixma TR4520

Apart from the above mentioned problem you may face, in such case you can take help of Canon printer experts. Canon printer professional technicians are well trained and are just about every glitch that can cause issues.