Why does my HP printer printing blank pages?
There are some things that frustrate gathering an important document or file and pressing blank print, only for the printer to send a blank sheet as soon as the day ends. There are some things that could be the cause of these problems, including:
- Empty ink or toner cartridges that need to be replaced.
- Ink or toner cartridges that have been dislodged from their proper place.
- Incorrect paper size loaded in the input tray.
- Clogged printhead nozzles that cause a buildup of blocked ink or toner.
- Blank pages in the document you are printing.
Solution for HP Printer Printing Blank Pages :
This problem can be easily solved. It is recommended that you use the original HP cartridge to print. You can also remove your black cartridge and use only a three-colour printer cartridge. You should also check the empty or defective cartridges and change them. Before that, replace the old cartridges with new ones and clean the print head correctly.
Read on to discover how to correct these problems quickly and reprint without any problems.
HP Printer Empty Cartridges :
We do not want it to sound condescending, but have you checked the ink/toner levels in your cartridge? After using the printer, they can be completely finished. Check the ink/toner level and change it when necessary. This error is caused by the chip on your cartridge, which is still reporting lower or empty ink levels compared to previous use. The chip itself cannot be reset, so when the cartridge is replenished and then installed in a new machine, it will still be registered as empty.
HP Printer didn’t connect Cartridge :
Even if your cartridge is full and ready to act, then it may be a bit changed and should not be in full electrical contact with the printer. The easiest way to solve this potential problem is to remove and restore the cartridge. It can complete the electrical circuit and can guarantee that everything works normally and is printed.
Printer Paper Size Incorrect :
This problem can occur if you change the locale in the Regional Settings tool in the Control Panel and then add the printer. When you add a printer, it is set to use a default paper size based on the current locale. If you then change the locale to an area that uses a different sized paper, your existing printers are not updated automatically to use the new paper size.
When you try to use your printer, it can be configured to use the wrong paper size. For example, your printer can be configured to use A4-size paper instead of letter-size paper, even if you have previously configured your printer to use letter-size paper. Yes
Printer Clogged Nozzles :
This problem is especially likely to affect people who use your printer since cured ink can clog the nozzles. If your printer has a ‘Print head nozzle check‘ option, select it and let the machine clean the nozzles. This should eliminate any obstruction and help the ink flow again.
If you have any questions in mind, you can request technical assistance from our technical support experts for HP printers. You need instant technical support for your printer in HP Printer Support and leave us all your questions and concerns.